Search found 238 matches

by admin
Tue Sep 19, 2017 2:24 pm
Forum: FAQ
Topic: Read hedge sensor data via UART?
Replies: 4
Views: 253

Re: Read hedge sensor data via UART?

Good catch. Thank you. I am able to read magnetometer readings. Here are the readings in 4 different directions 1 - (0, -150, 1034) 2 - (-600, -60, -830) 3 - (-640, -580, -1160) 4 - (-750, -600, -1400) How can we calculate the angle it is deviated from the north using those values? For HMC5883 sens...
by admin
Thu Sep 07, 2017 6:08 pm
Forum: FAQ
Topic: which beacon has IMU
Replies: 3
Views: 625

Re: which beacon has IMU

Uhhh now i feel kind of dumb... :? I ordered a starter kit, all 5 modules look identical. I thought that one was supposed to have an IMU but just assumed i was wrong that the beacon to be used as the HH should have that mode enabled. Was i wrong? One of the 5 modules actually does have an IMU? Than...
by admin
Wed Sep 06, 2017 6:54 pm
Forum: FAQ
Topic: which beacon has IMU
Replies: 3
Views: 625

Re: which beacon has IMU

trees wrote:When I unboxed my beacons, I didn't realize the one with the IMU would be identical to the rest. Is there a way to tell which one has the IMU now? I'd like to use that as my mobile beacon.



Yes. Please, connect to Dashboard via USB => View= Accelerometer data
by admin
Mon Aug 28, 2017 1:25 pm
Forum: FAQ
Topic: Cannot upload SW due to broken Microusb Port
Replies: 4
Views: 781

Re: Cannot upload SW due to broken Microusb Port

Hello, I am sorry to hear there is a broken USB. The easiest way to upload the new SW would be radio interface. You simply select the beacon in the Dashboard and upload the SW over radio. It takes a bit longer, than over USB, but still pretty quick. BR, Maxim Thank you for such a fast response! I t...
by admin
Mon Aug 28, 2017 10:57 am
Forum: FAQ
Topic: Cannot upload SW due to broken Microusb Port
Replies: 4
Views: 781

Re: Cannot upload SW due to broken Microusb Port

Dear MarvelMind, One of the beacons came with broken usb port. Since then you guys have released new SW but I cannot upload it due to broken port. I was wondering if it is possible to upload SW using external interface pinout on HW v4.5? I also have pictures and videos but I cannot attach here due ...
by admin
Fri Aug 25, 2017 6:06 pm
Forum: FAQ
Topic: How to configure submaps
Replies: 6
Views: 1418

Re: How to configure submaps

Adding a new beacon is also not easy: you have to unfreeze the map, but then the system starts to measure distances again, start shifting beacons, removing beacons that cannot be reached, forgetting relative orientation and position of submaps, .... It would be easier if you could directly enter th...
by admin
Fri Aug 25, 2017 5:56 pm
Forum: FAQ
Topic: submaps not saved
Replies: 1
Views: 549

Re: submaps not saved

The dashboard lets you freeze some or all of the submaps. It was stated that frozen submaps are stored in the modem. However as it appears only submap 0 is stored there: when I disconnect the modem and then reconnect it again, only submap 0 is presented in frozen state (offering to unfreeze it). Al...
by admin
Tue Aug 15, 2017 12:04 am
Forum: FAQ
Topic: Mobile beacon distance
Replies: 1
Views: 582

Re: Mobile beacon distance

Hello, I would like to know if i can get the totale distance the mobile beacon is doing. If yes where can get this data ? Thanks Jaafar Hello Jaafar, There are, at least, two ways: 1) Location data is streamed out. So, you can simply sum up all distances and calculate the total distance. Make sure ...
by admin
Wed Jul 12, 2017 7:56 am
Forum: FAQ
Topic: Trouble building Z coordinate
Replies: 2
Views: 762

Re: Trouble building Z coordinate

Hi all, I have set up a system of 4 beacons and one hedgehog multiple times and while the XY coordinates are great I cannot seem to get the z coordinate of the hedgehog correct. As you recommended in a previous post I manually set the height of the beacons but it seems like the z direction is inver...
by admin
Tue Jul 11, 2017 4:34 am
Forum: FAQ
Topic: Losing hedgehog tracking after 0.6m
Replies: 5
Views: 843

Re: Losing hedgehog tracking after 0.6m

We have 4 stationary beacons mounted horizontally to a plate in a rectangular pattern about 0.3m off the ground. This arrangement is able to track the hedgehog when it is close to the stationary beacons but the tracking drops out at distances greater than 0.6m y or 1.0m x. Here are some dashboard s...

Go to advanced search