Search found 221 matches

by admin
Fri May 26, 2017 12:47 pm
Forum: FAQ
Topic: Map background
Replies: 3
Views: 276

Re: Map background

DIAMI wrote:Thanks for that, but how can i edit it ? place my image in the center for example since stationary beacons are autoaticaly places there.

Thanks in advance

Jaafar



You move beacons and zoom them on top of the map ...
by admin
Fri May 26, 2017 12:46 pm
Forum: FAQ
Topic: Starting Set of Beacons
Replies: 1
Views: 178

Re: Starting Set of Beacons

Dear Community, I was wondering if there is a way to setup the dashboard and/or Modem, so that it sets the same beacon (i.e 77) at the beginning of the set. In other words, is there a way to make beacon 77 for example, the origin of the map at all times? For our project, we require our setup to be ...
by admin
Fri May 26, 2017 12:34 pm
Forum: FAQ
Topic: Outdoor GPS lock Pixhawk to loiter
Replies: 1
Views: 129

Re: Outdoor GPS lock Pixhawk to loiter

HI I commercially fly drones in Australia and we do a lot of structure inspections were we are totally under the structure with NO GPS lock these could be up to 100ft from the ground? with your system would I be able to use it for a position lock to allow stable loiter hold - these fly's are manual...
by admin
Tue May 16, 2017 12:07 pm
Forum: FAQ
Topic: System updates with frequency 1Hz, but 16Hz was choosen.
Replies: 2
Views: 161

Re: System updates with frequency 1Hz, but 16Hz was choosen.

ldsart wrote:1 hedgehog, 4 stationary
v4.5 system
Windows 10
Last version of firmware
System updates with frequency 1Hz, but 16Hz was choosen.


Please, check that the map is frozen (bottom-right corner on the map) ... it looks like it isn't.
by admin
Thu May 11, 2017 1:56 pm
Forum: FAQ
Topic: Map background
Replies: 3
Views: 276

Re: Map background

Hello,

Yes, it is possible:
Dashboard => Substrate - use PNG, GIF, JPG

BR,
Maxim
by admin
Tue May 09, 2017 5:28 pm
Forum: FAQ
Topic: NLOS and reflections in harsh environment
Replies: 1
Views: 164

Re: NLOS and reflections in harsh environment

Hello. It's obvious that ultrasound do not penetrate enough through walls or similar solid obstacles, and so non line of sight localization case seems not possible. But there are many other curious cases. In videos at youtube channel one holds tag with a space between it and body, tests makes in op...
by admin
Thu May 04, 2017 11:53 am
Forum: FAQ
Topic: Looking for help with Drone and beacon
Replies: 8
Views: 485

Re: Looking for help with Drone and beacon

Second I got the north part from hendrik but I will also watch the video too. When I freeze the map beacon's position change a lot. Some times it is really stable but otherwise beacon's position change really a lot. I have no idea. My another problem is that beacon is dying suddenly and I don;'t kn...
by admin
Tue May 02, 2017 12:09 pm
Forum: FAQ
Topic: Long distance detection
Replies: 1
Views: 189

Re: Long distance detection

Hello, I did some tests in a factory (large area), i have a problem on long distance detection using 4 stationary beacons. Do you advise to use more stationary beacons or use long antenna on the beacons ? Thanks, Hello, Please, describe what exactly was the problem. The distance can be limited by t...
by admin
Sat Apr 29, 2017 1:34 pm
Forum: FAQ
Topic: Beacon / Dashboard version mismatching
Replies: 4
Views: 213

Re: Beacon / Dashboard version mismatching

Ok. After upgrading all 10 beacons, they turn green from red. OTA FW update is a little hard. Could it be due to 10 devices active at the same time? Carrier frequency 919MHz, Radio profile 500kbps. Some major SW releases changes the SW protocols so much, that devices have to be DFU programmed. Rega...
by admin
Thu Apr 27, 2017 4:40 pm
Forum: FAQ
Topic: Looking for help with Drone and beacon
Replies: 8
Views: 485

Re: Looking for help with Drone and beacon

Thank you Maxim. Ok I have some questions about Indoor GPS setting. I am using the beacon in the tunnel which is less affected by noise. The thing is that I have big gap after I freeze the map. Second for UAV setting How could I set the north and How could I change the 0,0 coordinate in the map. Lo...

Go to advanced search