Search found 243 matches

by admin
Tue Nov 07, 2017 6:59 pm
Forum: FAQ
Topic: Power DIP switch doesn't work
Replies: 1
Views: 668

Re: Power DIP switch doesn't work

Hi, I have bought Starter Set – HW v4.9 – plastic housing but in a Beacon the DIP switch doesn't work. The Beacon V5.75.30 is always ON and battery is on charge even though the Power DIP switch is OFF. Regards Hello, I believe, we have discussed this case over email. Please, share your photos there...
by admin
Thu Nov 02, 2017 12:06 am
Forum: FAQ
Topic: Beacons not providing position updates consistently
Replies: 1
Views: 779

Re: Beacons not providing position updates consistently

Hi. I've had an issue recently where the hedges will, for arbitrary periods of time, stop providing position updates to my robot and the dashboard. The dots in the dashboard turn transparent, but apart from that, I have no idea what the problem is. As far as I can tell, it's not particularly correl...
by admin
Thu Nov 02, 2017 12:03 am
Forum: FAQ
Topic: Quad Copter GPS Accuracy - Raw data
Replies: 1
Views: 766

Re: Quad Copter GPS Accuracy - Raw data

Hello, I have been trying to have a Copter Quad Loiter in position when using Marvelmind's indoor "GPS", but we are seeing oscillations of about 2- feet. I have contacted ArduCopter thinking that it would be something on the FW code. This is their response from what of the developers One ...
by admin
Wed Nov 01, 2017 11:55 pm
Forum: FAQ
Topic: Quad Copter GPS Accuracy - Raw data
Replies: 2
Views: 797

Re: Quad Copter GPS Accuracy - Raw data

I would also like to see this implemented ASAP as we are experiencing similar issues with our indoor quadcopter system. The raw data has been implemented :-) However, it is not the Indoor "GPS" issue. It is an interface issue. As far as know, ArduCopter guys are now updating their part too.
by admin
Tue Oct 10, 2017 6:30 pm
Forum: FAQ
Topic: Pixhawk + Marvelmind Ground Mag Anomaly Error
Replies: 3
Views: 1620

Re: Pixhawk + Marvelmind Ground Mag Anomaly Error

Hi, I have a QUAD copter with Pixhawk and Marvelmind as the indoor GPS. My goal is to fly the drone autonomously by code using Dronekit. On the Marvelmind dashboard I can see the beacons and the hedge movement its pretty smooth. However, the drone doesn't hover. It always drift or pulls to one rand...
by admin
Tue Sep 19, 2017 2:24 pm
Forum: FAQ
Topic: Read hedge sensor data via UART?
Replies: 4
Views: 2372

Re: Read hedge sensor data via UART?

Good catch. Thank you. I am able to read magnetometer readings. Here are the readings in 4 different directions 1 - (0, -150, 1034) 2 - (-600, -60, -830) 3 - (-640, -580, -1160) 4 - (-750, -600, -1400) How can we calculate the angle it is deviated from the north using those values? For HMC5883 sens...
by admin
Thu Sep 07, 2017 6:08 pm
Forum: FAQ
Topic: which beacon has IMU
Replies: 3
Views: 2755

Re: which beacon has IMU

Uhhh now i feel kind of dumb... :? I ordered a starter kit, all 5 modules look identical. I thought that one was supposed to have an IMU but just assumed i was wrong that the beacon to be used as the HH should have that mode enabled. Was i wrong? One of the 5 modules actually does have an IMU? Than...
by admin
Wed Sep 06, 2017 6:54 pm
Forum: FAQ
Topic: which beacon has IMU
Replies: 3
Views: 2755

Re: which beacon has IMU

trees wrote:When I unboxed my beacons, I didn't realize the one with the IMU would be identical to the rest. Is there a way to tell which one has the IMU now? I'd like to use that as my mobile beacon.



Yes. Please, connect to Dashboard via USB => View= Accelerometer data
by admin
Mon Aug 28, 2017 1:25 pm
Forum: FAQ
Topic: Cannot upload SW due to broken Microusb Port
Replies: 4
Views: 2962

Re: Cannot upload SW due to broken Microusb Port

Hello, I am sorry to hear there is a broken USB. The easiest way to upload the new SW would be radio interface. You simply select the beacon in the Dashboard and upload the SW over radio. It takes a bit longer, than over USB, but still pretty quick. BR, Maxim Thank you for such a fast response! I t...
by admin
Mon Aug 28, 2017 10:57 am
Forum: FAQ
Topic: Cannot upload SW due to broken Microusb Port
Replies: 4
Views: 2962

Re: Cannot upload SW due to broken Microusb Port

Dear MarvelMind, One of the beacons came with broken usb port. Since then you guys have released new SW but I cannot upload it due to broken port. I was wondering if it is possible to upload SW using external interface pinout on HW v4.5? I also have pictures and videos but I cannot attach here due ...

Go to advanced search