Search found 4 matches

by sdr
Tue Jul 25, 2017 12:45 am
Forum: FAQ
Topic: Modem unresponsive when plugged in before bootup
Replies: 1
Views: 1477

Modem unresponsive when plugged in before bootup

I have a modem plugged into a Jetson TK1 via a USB hub that will not respond to serial commands when it is plugged in before Jetson bootup. If I unplug it and plug it back in it it works. Here is my dmesg output: [ 11.608108] usb 1-3.4: new full-speed USB device number 4 using tegra-xhci [ 11.621862...
by sdr
Tue Jul 11, 2017 9:13 pm
Forum: FAQ
Topic: Losing hedgehog tracking after 0.6m
Replies: 5
Views: 2262

Re: Losing hedgehog tracking after 0.6m

Thanks, this fixed my problem!

I set the submap area to a 5m x 5m square and it's working now. We don't plan on tracking any further than 4-5m away and we don't need to be very precise so I think we're good to go. Thanks again.
by sdr
Tue Jul 11, 2017 6:04 pm
Forum: FAQ
Topic: Losing hedgehog tracking after 0.6m
Replies: 5
Views: 2262

Re: Losing hedgehog tracking after 0.6m

Hi Maxim, 1) I tried setting the max distance to 10m and 100m but neither had any effect on the tracking distance. 2) The RSSI is in the mid-30s when tracking drops out, which is actually worse than when the tracking is working. I can still see the hedgehog distances in the distance table updating i...
by sdr
Mon Jul 10, 2017 10:42 pm
Forum: FAQ
Topic: Losing hedgehog tracking after 0.6m
Replies: 5
Views: 2262

Losing hedgehog tracking after 0.6m

We have 4 stationary beacons mounted horizontally to a plate in a rectangular pattern about 0.3m off the ground. This arrangement is able to track the hedgehog when it is close to the stationary beacons but the tracking drops out at distances greater than 0.6m y or 1.0m x. Here are some dashboard sc...

Go to advanced search