Search found 243 matches

by admin
Sat Apr 29, 2017 1:34 pm
Forum: FAQ
Topic: Beacon / Dashboard version mismatching
Replies: 4
Views: 589

Re: Beacon / Dashboard version mismatching

Ok. After upgrading all 10 beacons, they turn green from red. OTA FW update is a little hard. Could it be due to 10 devices active at the same time? Carrier frequency 919MHz, Radio profile 500kbps. Some major SW releases changes the SW protocols so much, that devices have to be DFU programmed. Rega...
by admin
Thu Apr 27, 2017 4:40 pm
Forum: FAQ
Topic: Looking for help with Drone and beacon
Replies: 8
Views: 1173

Re: Looking for help with Drone and beacon

Thank you Maxim. Ok I have some questions about Indoor GPS setting. I am using the beacon in the tunnel which is less affected by noise. The thing is that I have big gap after I freeze the map. Second for UAV setting How could I set the north and How could I change the 0,0 coordinate in the map. Lo...
by admin
Thu Apr 27, 2017 2:09 am
Forum: FAQ
Topic: Updating Beacons
Replies: 2
Views: 558

Re: Updating Beacons

I was able to update the modem (HW v4.9) from 5.41.22 to 5.51.24, but I'm unable to update the beacons. I have tried sending the update over radio as well as via USB. I have attached an image of the message I receive trying to upload a beacon with the HEX file. Hello, Thank you for highlighting. So...
by admin
Sun Apr 23, 2017 3:08 pm
Forum: FAQ
Topic: Update of Operating Manual - for your review and questions
Replies: 0
Views: 467

Update of Operating Manual - for your review and questions

Hello,

We published the updated manual: http://www.marvelmind.com/pics/marvelmi ... manual.pdf

Please, check it and comment what is missing or unclear or shall be covered from your point of view.
We will add and improve step by step.

Thank you,
Maxim
by admin
Sun Apr 23, 2017 3:05 pm
Forum: FAQ
Topic: Looking for help with Drone and beacon
Replies: 8
Views: 1173

Re: Looking for help with Drone and beacon

Hello. I am the graduate school student in Canada. Right now I am trying to making autonomous flight(waypoint based) drone. I am using the Marvelmind beacon instead of GPS. My mission planner can not be updated the MAP data from wifi because of my location. Here is the question. First ,do I need to...
by admin
Sun Apr 16, 2017 9:30 am
Forum: FAQ
Topic: Pixhawk - Marvelmind
Replies: 49
Views: 12136

Re: Pixhawk - Marvelmind

Easyaerial wrote:Yes, I meant larger distance between anchors and longer flight path. Wow, that is really tiny space you are flying in! Shoot me an email to ivan@easyaerial.com please. We might be able to help you with testing.



Here is the demo about larger space and longer path: https://youtu.be/HpYaK602pVU
by admin
Thu Apr 13, 2017 6:18 am
Forum: FAQ
Topic: outdoor use
Replies: 3
Views: 678

Re: outdoor use

NotInTheMafia wrote:Thank you for your prompt and informative reply! I do not wish to disclose project details in public, however I do believe your service and product will be extremely useful to us. How can you be reached more privately?



Drop us email: info@marvelmind.com
by admin
Tue Apr 11, 2017 10:58 am
Forum: FAQ
Topic: Positioning for drones in formation (around 10)
Replies: 1
Views: 472

Re: Positioning for drones in formation (around 10)

I would like to use MarvelMind for outdoor positioning of 10 drones flying in formation, the distance between two drones is about 3ft. Now I'm testing a smaller scale with 3 stationary beacons and 2 mobile beacons in a 30x30ft area and found out the positions of two mobile beacons fluctuate in 2ft ...
by admin
Mon Apr 10, 2017 9:00 pm
Forum: FAQ
Topic: outdoor use
Replies: 3
Views: 678

Re: outdoor use

Hello, I have a quick question about the outdoor use of this product. While it is advertised as a indoor positioning system i see several videos of it being used outside. I am building a parking lot sweeping rover and I believe this system could be the perfect solution to our positioning needs. I w...
by admin
Tue Apr 04, 2017 7:10 pm
Forum: FAQ
Topic: Pixhawk - Marvelmind
Replies: 49
Views: 12136

Re: Pixhawk - Marvelmind

I want to interface Pixhawk with Marvelmind sensors, so the pixhawk can see the sensors as GPS, but I am unable to do it. I use QGround Control to monitor the pixhawk and it gives a message "GPS Receiver missing', "No GPS Lock for vehicle". I followed this manual http://www.marvelmin...

Go to advanced search